Beckhoff company for all common I / O signals and field bus systems to provide a full range of bus components. We provide the type of rich I / O components, for you to choose the most suitable bus system:

EtherCAT

EtherCAT (Ethernet for Control Automation Technology, Control and automation technology for Ethernet) is a real-time Ethernet for industrial automation solutions, superior performance, ease of use.

Lightbus

This proven Beckhoff optical bus system has a very good anti-EMI performance, easy installation, fast data flow, circulation and deterministic.

PROFIBUS

PROFIBUS as a fast bus, peripheral component is widely used in distributed (PROFIBUS-DP). In addition to other PROFIBUS-DP and FMS, Beckhoff also supports the drive communication standard PROFIBUS MC.

Interbus

Interbus is easy to configure, fast and reliable communication. Master / slave system, protocol shift register cycle can provide efficient communication.

CANopen

Through the effective use of bus bandwidth, CANopen can be relatively low even when the data transfer rate of the system to achieve a shorter response time. Adhering to the traditional advantages of CAN, such as high data security and have Multi-master capability.

DeviceNet

DeviceNet is a sensor / actuator bus system, originated in the United States, but also in Asia and Europe, more and more applications. DeviceNet is based on CAN protocol (Controller Area Net, Controller Area Network).

ControlNet

ControlNet is an open standard field bus systems. The bus protocol allows the circulation of data and non-cyclic data exchange through the bus at the same time, and between the two affect each other.

SERCOS interface

SERCOS drive was originally used as a rapid development of fiber-optic bus system. Using Beckhoff SERCOS bus coupler, I / O devices can achieve high speed data transmission and shorter cycle time.

Ethernet

Ethernet is the dominant standard office environment. In the Beckhoff Ethernet products, and also adhering to promote the benefits of Ethernet, such as data transmission rate is high, easy integration with existing networks and a wide range of services and interfaces.

PROFINET

PROFINET is the PNO (PROFIBUS user organization) to develop for the open Industrial Ethernet standard: an international set of IT standards for communication (such as TCP / IP protocol).

EtherNet / IP

Ethernet / IP by ODVA (Open DeviceNet Vendor Association, the Open DeviceNet Vendor Association) entered into the industrial Ethernet standard. Ethernet / IP Ethernet-based TCP / IP and UDP / IP standard.

USB

PC technology, USB has become the standard interface with high transfer rate, flexible topology (through the integrated hub), etc., coupled with Beckhoff USB bus coupler, the distance is short, the system can replace fieldbus.

Modbus

Modbus is based on master / slave serial communication protocol open. Can be very easily in all types of serial interface to achieve, has been widely accepted.

Fipio

FIP according to EN 50170 European standards, and are subject to WorldFIP fieldbus organizations. The variables and information can be exchanged to achieve cyclic and acyclic, the bus performance can be adjusted depending on the application.

CC-Link

CC-Link (Control & Communication Link, control and communication link) is an open bus system for control and field bus communication between levels. Applications, mainly based in Asia.

RS232/RS485

RS232 and RS485 serial interface is a classic, has been widely used. Beckhoff RS485/RS232 I / O module is easy to implement using a simple serial communication protocol.

AS-Interface

AS interface in a simple, economical method of wiring to connect sensors, actuators and higher-level control layer. AS interface has passed the EN 50295 and IEC 62026-2 standards, to achieve international standardization.

DALI

Digital Addressable Lighting Interface (DALI, Digital Addressable Lighting Interface) is a building automation standard for digital control of electronic ballasts. DALI as a subsystem, such as lighting, blinds or temperature control, direct communication with building management systems.

EIB

EIB (European Installation Bus, European Installation Bus) is a bus system for building wiring, are widely used mainly in Europe.

LON

LON (Local Operating Network, local operating network) is a multi-network connection to the communication system for distributed applications. It is mainly used for commercial building automation applications